FY2020-2025 revenue to remain modest for Indian Components industry, says ICRA

India’s leading rating agency ICRA has estimated that the revenue decline for the Indian auto component industry will be limited to 6-8% in FY2021 supported by the better-than-expected demand pick-up across most seg...

TECHNOLOGY: Bentley Flying Spur V8 Engine: Facts And Figures

The new Flying Spur V8 has build on Bentley’s more than 60-year tradition of using cross-plane V8 engines. The V8-powered Flying Spur offers a characterful engine note, greater range between fuel stops and a reducti...

Mahindra & Mahindra invests Rs 1000 crore + to ready BS VI engines

The good news is that Mahindra & Mahindra is ready with its BS VI engines across its entire diesel and gasoline portfolio. The entire transition will be costing the company upwards of Rs 1000 crore. With its portf...

JBM Group acquires major shareholding in German auto major Linde-Wiemann

The US $ 1.5 billion India based JBM Group with business interest in auto systems and assemblies has acquired major shareholding in Germany based Linde-Wiemann GmbH KG, a leading manufacturer of complex structural ...

Sundaram-Clayton inaugurates new foundry in Chennai

Sundaram-Clayton Ltd. (SCL), a member of the TVS Group, inaugurated its new foundry at Oragadam, near Chennai, in Tamil Nadu. The new facility was inaugurated by Young Key Koo, Managing Director and CEO of Hyundai M...

Rico Auto forays into 4-wheeler aftermarket; completes one year in 2W aftermarket

After one year of successful journey of Rico Auto in the aftermarket two-wheeler market, the Arvind Kapur-controlled company has announced its foray in the 4- wheeler aftermarket component segment. The announcement ...

Triumph delivers 701 Street Triple motorbikes in India

The Street Triple range is now the largest selling roadster range from Triumph in India, after the Bonneville and Tiger series. The sales of the Triumph Street Triple have been 701 units so far since its introductio...

Car engines are tested for 12 hours and can reach temperatures over 900 deg

The Siberian village of Oymyakon remains at 50 degrees below zero for several months of the year, and is considered the coldest permanently inhabited place on Earth. On the other hand, registering a maximum of 57 de...

Synergies to set up largest alloy plant in Visakhapatnam, Andhra Pradesh

Synergies Castings Limited, India’s leading aluminium alloy wheel manufacturer announced the signing of an MoU with the Government of Andhra to establish a major greenfield aluminium casting and specialty alloy whee...

Tata Technologies becomes NIO’s preferred Engineering Partner for its EV range

Tata Technologies, a global engineering services provider, has announced a close association with NIO China, a leading new-generation electric car company, in the complete product development process of NIO’s range ...

Maxion Wheels to set up passenger car aluminium wheel plant in Pune

Maxion Wheels, the world’s largest wheel manufacturer, held a ground breaking ceremony (Bhoomi Poojan) for constructing a 25,000 square meters plant in Khed City, Pune in the State of Maharashtra in western India. ...

Brembo launches two Bybre products for scooters, motorcycles

Brembo Brake India which is engaged in development, production and sales of disc brake systems for 2 wheelers with the Bybre brand has launched two new products for the scooter and motorcycle segment at the Auto Ex...

Spark Minda unveils its third die casting plant in Pune

Global automotive component manufacturer Spark Minda, Ashok Minda Group announced the inauguration of its state of the art die casting manufacturing plant at Chakan, Pune by its flagship company Minda Corporation Li...

India’s first BS VI compliant vehicle- Mercedes-Benz S 350 d

Luxury car brand Mercedes-Benz achieved a historic milestone in the Indian automotive industry, by being the first automobile brand in India to launch the first ever BS VI compliant vehicles, ‘Made in India, for I...

JSW Energy to invest Rs 4000 cr in e-vehicles, energy storage systems business

JSW Energy Limited, part of the JSW Group and a growing energy company is planning to launch its own electric vehicle by 2020. The company is keen to enter into electric vehicles, energy storage systems and associat...

Jeep Compass, Tata Nexon will add zing to Ranjangaon plant

Two new car models from two different car manufacturers--the Jeep Compass SUV from Fiat Chrysler Automobiles (FCA) India and the Tata Nexon, a compact SUV from Tata Motors, are expected to inject a lot of action ver...

Rockman Industries acquires majority stake in Moldex Composites

Rockman Industries, a Hero Group company has acquired a majority stake in Moldex Composites, a British-Indian venture, thereby making its intention known that it is investing in next-gen carbon composites technology...

Interview with Roy Kurian, Vice President, Sales & Marketing, Yamaha Motor India Sales Pvt. Ltd.

Roy Kurian, Vice President, Sales & Marketing, Yamaha Motor India Sales Pvt. Ltd.Kurian feels the two-wheeler industry in India is evolving big time.

Lanxess polyamide 6 for the engine oil pan of a six-cylinder boxer engine

The trend of manufacturing engine oil pans from plastic instead of metals such as aluminum is continuing to gain ground. For historical reasons, the plastic of choice to date has almost always been polyamide 6.6. Ho...

Mahindra Intertrade, MSTC Ltd. sign MoU to set up India’s first auto shredding facility

Mahindra Intertrade Ltd., a wholly owned subsidiary of the Mahindra Group, has signed a Memorandum of Understanding (MoU) with MSTC Ltd. (a Government of India enterprise formerly known as Metal Scrap Trading Corpor...

Roll-Royce aluminium tryst in testing phase

In February 2015, Rolls-Royce Motor Cars announced the development of an all-new aluminium space-frame architecture that will underpin all future Rolls-Royce models arriving in market from early 2018. The company ha...

Jenvey Dynamics launches new lightweight, durable performance throttle body kit

Leading developer and producer of fuel injection throttle body and induction systems, Jenvey Dynamics Ltd., has announced the launch of a new manifold and throttle body (ITB) kit for the popular Ford Pinto engine. J...

Brembo presents a new family of calipers for high-end cars

At the IAA 2015, Brembo launched a new 5 openings caliper that allows a weight reduction of 8pc while maintaining stiffness. Brembo, a world leader in the design and manufacture of braking systems for the automotive...

Federal-Mogul Powertrain new material for automotive diesel pistons

Federal-Mogul Powertrain, a division of Federal-Mogul Holdings Corporation of the US has announced that it has developed a new premium diesel piston aluminium alloy, called DuraForm-G91. In benchmarking tests, the n...

South India Special Part 2: Karnataka

Karnataka is India’s eighth largest State in terms of area and 9th largest State in terms of population. Some of the prominent cities in the state are Bengaluru, Mysore, Mangalore, Belgaum, Gulbarga, Hubli-Dharwad,...

JLR invests £ 600 m (Rs 5572 crore) in UKs West Midlands region

Jaguar Land Rover owned by Tata Motors has invested 600 million pounds (Rs 5572 crore approx.) in the West Midlands region in the UK to support product creation and advanced vehicle manufacturing. The largest single...

New Brembo braking system for Ferrari 488 GTB

The new Ferrari 488 GTB that made its debut at the Geneva International Motor Show has a serious bit of Brembo in it. Global braking champions, Brembo has perfected a high performance braking system offering mechatr...

Uno Minda, Kosei Aluminum JV for alloy wheels

Nirmal Minda controlled Uno Minda and Kosei Aluminum Co. ltd. a leading Japanese alloy wheel manufacturer have entered into a joint venture agreement to manufacture and sell alloy wheels in India. The JV ceremony to...

A new “Effortless...Everywhere” Roll-Royce being developed

Uber luxury car maker Rolls-Royce Motor Cars has confirmed that it will develop an all-new Rolls-Royce with exceptional presence, elegance and purpose. This motor car will be Effortless...Everywhere. This car will ...

ACMA wish list for Budget 2015-16

With an aspiration to cross the USD 100 billion mark and to have at least five Indian suppliers amongst top-global-hundred by 2020, the Automotive Component Manufacturers Association (ACMA), the apex body for the In...

After targeting autos, Durr now eyes India’s railway space

Global mechanical and plant engineering firm, Dürr is hoping to offer its highly advanced technology as one of the solutions for the Indian Railway’s ambitious hi-speed corridor bullet train projects.Dürr’s activiti...

Dana aluminum cooling solutions for EV, hybrids

Dana Holding Corporation, a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies, has announced the introduction of a new aluminum cooling technology for electric ...

Jaguar Land Rover 1st overseas manufacturing facility

Tata Motors owned Jaguar Land Rover has opened its inaugural overseas manufacturing facility in China. The Range Rover Evoque will be the first model to be built under the first Chinese-British automotive joint vent...

Composites from Lanxess find new applications

The continuous fibre-reinforced high-performance Tepex composites from Lanxess subsidiary Bond-Laminates are finding new applications in the area of automotive bodywork, says a company report. One example is the use...

Bharat Forge global subsidiary wins Euro 250m deal

Bharat Forge Limited announced that its German Subsidiary Bharat Forge Aluminumtechnik GmbH & Co KG (BFAT) has won a multiyear contract approximately worth Euro 250 million (Rs 2058.6 crore approx.) from a German OE...

A 7,900 tonne stamping machine at JLR plant in UK

Jaguar Land Rover, a Tata Motors owned company based in the UK and a leading manufacturer of premium vehicles has invested £45m (Rs 455 crore approx.) in a new state-of-the-art servo press line at its Halewood Opera...

Audi Smart Display: Entertainment in your hands

Audi displayed a prototype Portable Smart Display at the Consumer Electronics Show (CES) in Las Vegas. The Smart Display Tablet puts a 10.2inch full-HD display encased in brushed aluminium in your hand. The portable...

JLR to invest £1.5 billion for aluminium platform

Jaguar Land Rover (JLR) announced an investment approaching £1.5 billion (Rs 15,139 crore) to introd

Hero Cycles inaugurates aluminium cycle plant

Hero Cycles Ltd. has inaugurated its new all-aluminium cycle plant at its existing facility in Ghazi

JLR signs LOI with Saudi Arabian government

Jaguar Land Rover (JLR), the marquee British brands owned by Tata Motors, and Saudi Arabia’s Nationa

British PM David Cameron visits JLR facility

On December 7, 2012, Jaguar Land Rover (JLR) facility in Solihull in the United Kingdom had a very i

Baba Kalyani conferred Cross of the Order of Merit

Baba N. Kalyani, Chairman & Managing Director, Bharat Forge has recently been honoured with the “Cro

JLR invests £370 million in all-new Range Rover

Jaguar Land Rover, the UK’s leading premium carmaker, announces it has invested £370 million to upgr

Hero Cycles begins aluminium frame production

Hero Cycles Ltd. has announced the setting up of a new assembly unit. The new unit has been incorpor

Interview with Sameer Sodhi, Director Business Unit, Automotive Lighting, South West Asia, Philips Electronics India Ltd.

We are investing a lot in plants in China where we have two new plants. We also do partnership where we come up with the design and the partner manufactures it as per our specifications.

Interview with Ramesh Suri,Promoter and Chairman, Subros Ltd.

My vision is to continue working and moving ahead. Unless you have the fire inside, you cannot keep going. Once this fire dies out, you stop. If I see any more opportunities I shall look into it. The fire in me is s...

Tata AutoComp & TRAD ink MoU to set up R&D unit

Toyo Radiators (Tata Toyo), joint Venture between Tata AutoComp Systems Limited, TRAD- Japan

Interview with P.Balendran, Vice President (Corporate Affairs), General Motors India

When we entered India in 1994, we had to do so with a local partner as per the then prevailing automotive policy. The automatic approval route only came about in 2002. So when we came into India we tied up with Hind...

IYM appoints Roy Kurian as National Business Head

India Yamaha Motor Pvt. Limited (IYM) has announced the appointment of Roy Kurian

Interview with Niraj Hans, Managing Director, Fiat Partecipazioni India Pvt. Ltd.

On the operations front we are an independent company. Having said that, our synergies exist with other Fiat companies. We keep on discussing our strategies with regards to a particular supplier.

1.6-litre GTDi engines from Volvo

SWEDEN:Volvo's engine range is now being expanded with the T3 and T4, two four-cylinder 1.6-litre pe




Contact Us

For Marketing & Sales, Contact:
Jisha P.
jisha.motown@gmail.com
sales@motownindia.com
advertising.motown@gmail.com
Ph: 9958125645

Registered Office:

Motown India
4058, D-4, Vasant Kunj,
Opposite to Fortis hospital
New Delhi - 110070

© 2022 MotownIndia - ALL RIGHTS RESERVED
POWERED BY - VIDYA SOFTWARES