its new electric drive system for buses, Voith delivers a well-balanced
complete system and enters the growing market for e-mobility. The innovative as
well as reliable drive impresses with low weight and maximized efficiency,
rounded off with an intelligent energy management system.
At the show, Voith will
introduce the demonstrator bus to the general public, under the motto
"Drive New Ways."
The drive system was
originally conceptualised as a prototype for a Solaris Urbino Bus, but it can
be integrated into vehicles from other manufacturers without restrictions.
"The achievable range primarily depends on the battery, which we acquire
from an internationally renowned supplier," explains Jürgen Berger,
project manager at Voith Turbo GmbH & Co. KG. "We are currently using
a lithium-iron-phosphate battery. This battery offers the highest level of
reliability, but the electric drive system is designed in such a way that it
can work together with any battery technology," says Berger.
With a torque of 2,250 Newton meters and an
output of 260 kilowatts, the liquid-cooled permanent magnet motor with
high-efficiency inverter and smart energy management system provides
outstanding driving performance and does not require a separate transmission.
The system can even efficiently operate heavy articulated buses. The compact
design of the drive means that it is not only low in weight but also low in
noise emissions and maintenance. The consistently employed lightweight design
approach makes it possible to minimize any surplus weight, which in turn has a
positive effect on energy consumption and consequently the achievable range.
What's more, the targeted brake force recuperation of the drive positively
affects mileage. The fact that all components are cooled with water increases
reliability and performance and makes it possible to reduce noise emissions
The range of the demonstrator bus currently
exceeds 200 km. This corresponds to the total daily operation of a conventional
city bus line. In the coming years, this range is expected to increase thanks
to further developments in battery technology.
Studies have shown that inner-city traffic is
subject to increasing changes, brought on by developments in terms of growing
population, air pollution as well as climate change. The demand for
environmentally friendly, low-noise drives in public transport is rapidly
growing. Added to this is the political pressure, as for example restrictions
imposed on nitrogen oxide and noise emissions, meaning that the number of
electric drive vehicles will continue to grow in the coming years.
The concept of mobility must adapt to these
circumstances if individual traffic is still to be allowed inside cities in the
future. “Especially for the bus fleets of municipal transport services, the
time for electro mobility has definitely arrived," says Cornelius
Weitzmann, Executive Vice President & CEO Mobility of Voith Turbo GmbH
& Co. KG. "As an established and experienced partner of the bus
industry, we have acquired an extensive amount of experience in regard to the
various drive systems used for buses. With the new electric drive system, we
are putting this experience to good use and add yet another milestone in our
company history to our portfolio."
Voith is expecting that by
2030, electric drives will have taken up a superior position in the bus fleets
of transport operators compared to other drive solutions. Significant growth of
the electro mobility market for buses is expected for all regions of the world.
In the course of this, the city bus segment is only the first step toward an
emission-free city, which will soon enough be followed by other segments of the
Voith also scores top marks when it comes to
data capture and analysis, offering an integrated approach and extensive know
how from Voith Digital Solutions. "We bring together our innovative
technical system approach with our experience in public transport," says
Dr. Robert Müller, manager of Strategic Design Market Development at Voith
Digital Solutions. "Thanks to our systems, we have obtained two decades
worth of elementary data and knowledge regarding driving profiles and cycles
within large inner city bus fleets. This is the crucial benefit for operators
in the age of intelligent data networking. You want to operate your vehicle
fleets efficiently and cost-effectively." This is precisely what the
integrated system approach of the electric drive system ensures.
Source: IAA COMMERCIAL VEHICLES 2018
Pune based automotive major
Force Motors launched the country’s only 33/41-seater monocoque buses at the
BusWorld 2018 Exhibition. The Traveller-Monobus is loaded with several novel
features offered for the first time in midi-bus (33 – 41 seats) segment.
The Traveller-Monobus is
powered by the 115 HP / 350 Nm, Mercedes derived, 3.2 litre, Common Rail
engine. On account of the monocoque construction, it is not only extremely
robust but also lightweight. It offers peak torque of 350Nm from 1600 to 2200
rpm, the high low-end torque ensures smooth ride even at low speeds. In
addition, Traveller-Monobus has best-in-class power to weight ratio and being
almost 800 kg lighter than comparable models, offers unmatched fuel efficiency.
The advanced 5 speed
synchromesh gearbox with double cone synchronizer rings, offers low friction
and smooth transmission. The special clutch lining is designed for frequent
start-stops common in short distance tour and bus operations.
The Traveller-Monobus offers
great structural strength and durability and is the only vehicle in its class
to adopt the 6th Generation Cathodic Electro Deposition (C.E.D) Dip painting
process for the whole body, for primer application thus offering the highest
levels of rust protection and corrosion resistance.
The Traveller-Monobus comes
with disk brakes on all wheels with new uni-booster hydraulic braking
technology, ABS, EBD and latest Engine Drag Torque Control. With very low floor height for easy entry and
exit, lowest centre of gravity for superb ride stability, lowest NVH levels,
smallest turning radius, the Traveller-Monobus offers good ride quality and seating
comfort, with its 2.35m wide body interiors, a wide gangway, full standing
height and ample leg room.
The Traveller-Monobus is fully
tooled up and designed by the R&D team in Force Motors. It is entirely made
of pressed steel panels welded in an automated and robotic environment. It is backed
by the company’s manufacturing experience spanning over 6 decades and supported
by country wide network of over 200 dealers fully equipped with trained
manpower, special tools and ample stock of reasonably priced spare parts.
Speaking on the occasion,
Prasan Firodia, Managing Director, Force Motors noted, “The Traveller-Monobus
is a fully in-house effort of our R&D team and I am confident it will set
new benchmarks in performance, comfort, reliability, durability and safety.
These same qualities have enabled Traveller to become acknowledged leaders in
the 9-26 seater minibus category. The monocoque construction is possible due to
extensive use of large pressed panels – which are fully designed, tooled and
produced in house. Force Motors has applied for a number of patents on this
product and process technology”
The Traveller-Monobus would be
available in 33-seater and 41-seater options in standard and school bus
variants at Force dealerships across the country during the upcoming festive
India, a subsidiary of leading Finnish clean energy company Fortum Oyj and
Clean Motion, manufacturer of 3- wheeler e-Auto Zbee, showcased a battery
swapping project tailored for light electric vehicles in India after successful
trial of proof of concept for last two months.
project comprises of 90 NMC batteries of 1.5 kWh, one swapping station with 20
batteries and 30 Zbees which has been modified for swapping. The main goal of
this project is to evaluate a complete battery swapping system, including
vehicles without battery, batteries and charging stations; both technically,
live demo was conducted onsite on how it will work by taking out the battery
from Zbees, putting it back in swapping station, taking out one from station
and putting it in Zbee and vehicle driving. The entire process of swapping and
driving which Fortum terms as ‘Change & Drive” takes not more than 2-5
minutes which offers excellent turn-around time to e-Autos which will increase
their revenue earning potential by allowing them be on rad for longer time. The
unique element includes size and weight of the battery which is approximately
13kg making it convenient to be handled by one person.
project was showcased in presence of officials from NTPC, Indian Oil, Embassy
of Finland, and leading vehicle manufacturers, battery manufacturers and
suppliers, and startups.
guest of honour, Ms. Nina Vaskunlahti , Ambassador of Finland to India said,
“India is one of the fastest growing economies in the world and we are really
proud of the thriving relations between Finland and India. The focus between
the two countries in addition to good political relationship is on business and
economic cooperation. In the NORDIC cooperation, our approach is based on three
principles - Openness, Innovation and Collaboration. This is a testimony to
what we witnessed here today. We are happy to see Nordic companies bringing in
their best technology and solutions and custom build it for the Indian
primary target market for the initiative are the major taxi companies in India,
and other organisations with large fleets of vehicles that are in need of high
uptime in their operations. This project aims to address the woes of end
customers’, high cost of owning an EV by reducing the initial costs for
Paint, Asia’s No 1 paint brand in terms of revenues, has pioneered a cutting
edge technology for commercial vehicles painting. Nippon Paint has introduced
its unique ‘Wet on Wet (WoW) Painting Technology’ in India, with a focus on
delivering a lean and extremely efficient painting process to the CV OEMs and
major bus body manufacturers.
WoW technology solution will drastically reduce painting cycle time, energy
requirement and labor cost and significantly improve productivity in the
painting process. With rapid strides in product solutions, Nippon Paint aims to
become the clear leader in the commercial vehicles segment space in India by
2021. The launch follows Nippon Paint’s recently-announced unique express
painting system for the automotive aftermarket.
Paint currently works with most of the leading OEMs in the country and is also
a preferred player in the private bus-body segment in India. Nippon Paint is
also working closely with the major State Transport Undertakings in India.
Malhotra, President Automotive, Commercial and Wood Coatings, Nippon Paint
(India) states, “The Indian commercial vehicle industry is a focus sector for
us. Our objective is to develop and introduce state-of-the-art high
productivity solutions for the CV industry. We aim to drastically improve
throughput for our customers without any major capital investment from their
end. This is just the first step in our mission to introduce world-class
products developed by our global R&D team that add tremendous value to our
CV and light industrial customers.”
Taylor, Global Technical Manager for Nippon Paint states, “The biggest
challenge faced by commercial vehicle manufacturers in the painting process is
how to optimse efficiency. Nippon Paint aims to solve this problem by
delivering customized solutions that maximize efficiency based on
customer-specific production lines and infrastructure. Our WoW technology
solution minimizes sanding and baking processes, thereby delivering efficiency
improvements of up to 50% and cost reduction of up to 20%.”
Source: Nippon Paint
Sony India has introduced the new XAV-AX8100 in-car media receiver, offering new utility features, powerful sound and smart features.
ExxonMobil Lubricants Pvt Ltd launched its upgraded Mobil Super Moto range of engine oils to make it easier for people to maintain their two-wheelers in top condition. The launch comes at a time when...
3M India has launched its revolutionary 3M Performance Spray Gun, an innovative spray technology that delivers top-of-the-line performance with unrivaled productivity.
In an exclusive interview, Uday Narang, Chairman, Anglian Omega Group & Omega Seiki Mobility
talks about his company plans to enter the two and four wheeler electric vehicle space.
Motown India speaks to Woosuk Leem, Managing Director, AS Parts Division, Mobis India to get more details about the Hyundai Mobility Membership App and its advantages.
Vishal Mathur, Senior Vice President, LMD Truck Business – VECV elaborates upon VECV’s Light & Medium Duty (LMD) business in India, the company’s product offering and the several advantages offered by...